Aquatop NP-80 80 GPH Aquarium Submersible Pump

Imagine a serene aquarium with water flowing gracefully by the Aquatop Aquarium Pump NP-80. This fully submersible pump ensures optimal water circulation, enhancing your aquatic environment’s health. Its compact design fits seamlessly into nano to medium-sized aquariums, small ponds, and water gardens. Aquatop Experience the tranquility of a well-maintained aquarium with the best aquarium pump filter.

• The Aquatop Aquarium Pump NP-80 is constructed with durable materials designed for longevity. Its sturdy casing protects internal components from water damage. The pump’s impeller is made to minimize wear and tear, reducing maintenance needs.

GUARANTEED ANALYSIS:

• A drip loop must be used with all Electrical aquarium devices. A drip loop is a self-made part of the cord hanging below the receptacle.
• A GFCI (ground fault circuit interrupter) should be used in the branch circuit supplying all power to water pumps. And electrical aquarium equipment. If you do not have a GFCI, we strongly recommend having a qualified electrician install one prior to operating any aquarium component.
• Do not plug into the extension cord/power strip.
• Use this product for its intended use only.
• Never yank or pull the cord from the electrical outlet.
• Do not operate if the plug or wire is damaged.
• Verify that hands are dry prior to disconnecting the Power.
• To reduce the risks of electrocution, keep all connections dry.
• For indoor use only.
• If any of the electrical components get wet, unplug immediately.
• Do not use soaps or detergents when cleaning this device.Thoroughly clean and rinse with warm water and make sure the device is completely dry before connecting.
• Keep this product away from children.

• Unpack the pump and inspect for any visible damages before installation.
• Attach the appropriate fittings based on your aquarium’s requirements.
• Place the pump in the desired location within the aquarium or pond, ensuring it’s fully submerged.
• Connect the pump to a suitable power source matching the specified voltage and frequency.
• Adjust the flow rate using the valve to achieve the desired water circulation.